Self-Adhesive 105 4-Pack: Glue-Free Lash Application Guide

By Ardell | Lashes, Nails, Brows & Duo Glue | Published: 2026-11-05

Category: How-to Guides

Learn how to wear self stick lashes with the Self-Adhesive 105 4-Pack. A step-by-step glue-free lash application guide with checkpoints for a clean, secure fit.

Quick answer

To wear self-adhesive 105 lashes, skip liquid glue entirely: the pre-glued band bonds directly to your lash line. Clean your lids, check the band's tackiness, and press the strip into place with a light hold.

Why the pre-glued band changes your routine

Self-adhesive lashes replace the glue step with a tacky band, so the usual wait for adhesive to get tacky disappears. That makes them a practical choice for beginners or rushed mornings. The trade-off is that the band's stickiness is finite; once it loses tack, the lash won't hold as securely as a freshly glued strip. Plan to use each pair while the band is still fresh, and avoid touching the adhesive strip with your fingers.

When self stick lashes are the right call (and when they aren't)

Choose self-adhesive lashes for quick, low-mess application and for on-the-go touch-ups. They're less ideal if you need all-day hold in humidity or if you plan to reuse a pair many times, since the adhesive weakens with each wear. If you want maximum control over placement and hold, a traditional glue-and-strip method may suit you better.

Step-by-step: how to apply self-adhesive 105 lashes

Prep your eyelids: Wash your face and make sure your eyelids are completely clean and dry. Avoid applying moisturizer, oil, or makeup to the lash line area before application. Any residue on the lids will prevent the self-adhesive band from sticking properly.
Check the band's tackiness: Before placing the lash on your eye, lightly touch the adhesive strip with a clean finger. It should feel slightly sticky. If it feels dry or slick, the lash may not hold. If the band has lost its tack, do not wet it or add glue; use a fresh pair from the 4-pack instead.
Trim if needed: Hold the lash against your lash line without pressing down. If the strip extends beyond your natural lash line, trim the outer end with small scissors. Trim only the outer edge, never the inner corner, to keep the lash shape intact.
Position and press: Using tweezers or clean fingers, place the lash as close to your natural lash line as possible. Press gently along the band from the inner corner to the outer corner and hold for a few seconds. Avoid pressing too hard or sliding the lash; repositioning can weaken the adhesive.
Secure the corners: Gently press the inner and outer corners once more to ensure they are firmly attached. If a corner lifts, press it down again with a clean finger. If a corner won't stay down, the band may be losing tack; switch to a new pair.

Product facts

Self-Adhesive 105, 4-Pack: Pre-glued lash band eliminates the need to apply liquid adhesive. You can skip the glue step and apply the lash directly, saving time and reducing mess.
Self-Adhesive 105, 4-Pack